Protalus Insoles for
Comfort, Alignment,
and Support

Protalus M-100 Elite

M-100 maximum geometry plus thicker polyurethane — anti-fatigue mat material — to absorb what hard concrete and factory floors do not. Built for the depth safety boots and work boots provide.

• Full-length landing gear with extra cushion for higher-volume shoes — work boots, military boots, hiking boots, and roomier footwear

• Maximum geometric guidance for on-axis (ankle) loading with every step

• Extra cushion layer for added impact management
• Replaces your factory insole
• Universal fit — flat feet, high arches, and everything between
• Protalus Alignment Technology inside
• Fits average to wide width, up to 4E

$64.95

Protalus T-100 Elite

All T-100 guidance, plus thicker polyurethane — anti-fatigue mat material — to absorb what hard surfaces do not. Requires slightly more room than T-100.

• Full-length landing gear with extra cushion for lower-volume shoes — sneakers, running shoes, and everyday footwear

•Effective geometric correction for on-axis (ankle) loading with every step

•Extra cushion layer for added impact management

• Replaces your factory insole
• Extra cushion layer for added shock absorption
• Universal fit for flat feet and high arches
• Protalus Alignment Technology inside
• Fits average width, up to 2E


   

$64.95

Protalus T-100

T stands for Thinner. Fits almost any shoe with a removable insole. The right starting point for your body and the shoes you already own.

Not an insole. Landing Gear. Built as a runway — where your foot knows exactly what to do the moment it touches down. Put them in your shoes. Take a step. Your body will tell you. 95 out of 100 say yes. The other 5 get every cent back.

$64.95

Protalus M-100

Full-length. Maximum walls. Needs approximately 7mm more room than the T-100. Most boots — work, hiking, safety — have the depth the M-100 needs.

Not an insole. Landing Gear. M stands for Maximum.

The T-100 introduced your foot to correct geometry. The M-100 is the full version — deeper walls, more of your foot guided through the correct motion sequence, through more of every step, under more load.

This is our flagship. In an independent 3D motion capture study (BioMechanica LLC, Dr. Martyn Shorten, Ph.D., 2019), 28 out of 31 people walked within correct mechanical range with the M-100. The T-100 gets 19. A standard foam insole gets 3.

One requirement: your footwear needs room. Boots, work shoes, and most shoes with removable insoles have it. If your shoes are snug with the T-100, you may be able to get away with the M-75.

Put them in your shoes. Take a step. Your body will tell you. 95 out of 100 say yes. The other 5 get every cent back.  

$64.95

Protalus M-75

3/4 length. Sits on top of your existing insole — no removal needed. For snug fit, wide forefoot, or fixed insole shoes. Maximum M-100 walls at the heel where every step begins.

• ¾-length landing gear for higher-volume shoes with non-removable insoles 
• Maximum geometric correction for on-axis (ankle) loading with every step

• Thicker profile delivers our maximum level of alignment correction
• Comfortable for flat feet and high arches alike
• Features clinically proven Protalus Alignment Technology
• Addresses the leading cause of plantar fasciitis for lasting relief
• Designed for average to wide feet (up to 4E) 

 

$64.95

Protalus T-75

3/4 length. Fits snug fit, wide forefoot, or fixed insole shoes where full-length Landing Gear cannot go. Same T-100 guidance — at the heel, where every step begins.

• ¾-length landing gear for lower-volume shoes with non-removable insoles 
• Effective geometric correction for on-axis (ankle) loading with every step

• Thinner profile
• Comfortable for flat feet and high arches alike
• Features clinically proven Protalus Alignment Technology
• Addresses the leading cause of plantar fasciitis for lasting relief
• Designed for Narrow to Average feet   

$64.95

Protalus H-75

For High Heels

• For high heels with non-removable insoles
• Sits on top of your factory insole
• Universal fit for flat feet and high arches
• Adds cushion and support
• Will accommodate average width up to size 2E

$24.95

Protalus M-100 Gen 1

Discontinued model, for large volume shoes and boots

The first generation of Protalus's M-100 Insole

• Patented Alignment Technology: The M-100 features a deep heel cup and contoured arch to correct overpronation and promote better posture, stability, and joint health throughout your body.
• Comfortable Insoles: The patented stress relief replacement shoe insoles increase comfort and relieve plantar fasciitis and anti-fatigue.
• Improves Alignment: The shoe insoles help improve alignment and reduce pain in the feet, ideal for low and high arches. 

$34.95